No. Electricity follows the path of least resistance. It has nothing to do with a split tip or a fancy U groove! The sparkplug does one thing only. It acts as the grounding source for the ignition's electricity and that's it, period, end of story. The only difference with a sparkplug is that there is a gap in the current path which makes the spark. The size of the spark is dictated by the voltage and amperage output of your coil, and the output of your coil is dictated by the saturation (dwell) time of your ignition system. You'll hear claims like, "it made more horsepower" or "I got better gas mileage". Well of course they did! Their engine needed a tune-up or they wouldn't have been changing the plugs in the first place! ANY engine would get better gas mileage and make more horsepower after a tune-up!
What split tipped plugs can do is promote pre-ignition and/or detonation, ESPECIALLY in a high performance engine. How? Try this; take a paper clip and heat the end up with a typical Bic lighter. It gets hot real fast and glows cherry red... just like a glow plug! The last thing you need (or want) in any kind of performance engine is a glow plug!
Now take a hanger, or a little thicker piece of welding rod, and try to heat it up with the same Bic lighter. Oh yeah, it gets hot, but not hot enough to glow cherry red and become a glow plug. It's simple; it takes more heat to heat-up larger / thicker objects than it does smaller / thinner objects. What do you think those tiny little pieces of split tip ground strap are doing inside your engine? Glowing, because the mass of the ground strap has been cut by 50% when they split it! Now add more compression and burn more fuel ("heat" - like in a performance or race engine) and those thin split ends act like dog gone glow plugs... preignition... ka-boom! In that order.
Now there ARE things you can do to help the burn in the cylinder with the spark plugs (which actually will increase power), such as indexing them. It's easier to show you how to do this than to tell you, but here's a quick overview so you'll at least get the basic idea. Indexing a spark plug puts the open end of the gap towards the intake valve, or towards the center of the cylinder. This way when it sparks, the ground strap isn't in the way, blocking the flame path into the cylinder. It exposes the open end of the gap towards the fresh air / fuel mixture coming through the intake valve and into the cylinder, which helps light the cylinder faster and more evenly. Better burn = more power. There's a little more to it, and like I said, it is easier to show you than it is to write it out. You can see in the picture what a typical good index looks like and how the open-end of the gap is exposed towards where all of the fuel and air is to promote a better flame travel. You can enlarge the picture by clicking on it if you want to see it better.
To index your plugs, you start by marking the outside of the spark plug with a Sharpie pen in line with the back side of the ground strap. When you screw the plug into the head, try to get the mark to point away from where the intake valve would be. This puts the back side of that ground strap pointing at the exhaust valve or at the back side of the combustion chamber, which in turn points the open-end of the gap more towards the intake valve and into the open area of the cylinder for a clean, unobstructed flame path. They actually make special crush sleeve "washers" that go onto the spark plugs so you can snug the plug up, yet continue to turn it to "index" the plug to where you want it. You can order them at any good performance parts supplier. They're just called "Spark Plug Indexing Kits".
Obviously heat range has a little to do with how a plug fires too, but that subject is always a mystery to many people. Many guy's run way too cold of a plug in their performance engines because "their buddy" told them to. I always get a kick out of that. If I had a nickel for every time I heard someone say "my buddy told me to do that" for something that totally didn't work, I'd be a millionaire! Anyway, cold plugs don't retain enough cylinder heat to burn-off deposits and they foul quickly, thus making your engine run like crap. A hot plug runs cleaner because nothing can stick to it. When you clean greasy dishes in your sink, you use hot water to cut the grease, right? Well, spark plugs aren't much different. Now, the wives tale is that a hot plug will make your engine run hot, and that is about the most ass-backwards thing as you can get. Hold a new spark plug in your hand. Is it hot? NO! So how can something that isn't hot, and that doesn't create heat make your engine run hot? It can't. The cylinder temperature inside your engine heats the plug up, not the other way around. All a hot or cold plug means is how hot the core temperature (or running temperature of THE PLUG) will be. It has NOTHING to do with engine temperature, period! If you run too hot of a plug, it will allow it to retain too much heat and it will begin to melt off the electrode, thus causing the engine to misfire. The trick is, you want the hottest plug you can possibly run WITHOUT melting off the electrodes.
Now, a cool trick for nitrous and blower guy's is when you run a plug that is on the hot side, you can actually use the plug as a "safety fuse". In other words; if your plugs run just under the melting point, then if you have the misfortune of leaning the engine out, (which is THE worst thing you can do to a nitrous or supercharged engine), it will increase the plugs core heat and melt off the electrode, thus causing that cylinder to not fire anymore. No more fire = no heat. No heat means no lean-out melt down. Obviously it takes time and testing to figure out exactly what to run, but these tips give you some good ideas and starting points anyway.
If you REALLY want to learn about this kind of stuff, and in much greater detail, we do have our Auto Shop Videos series, which is the absolute best way to learn about this kind of stuff without being taught one-on-one in person. We cover plugs and such in our "Superchargers" and our "Nitrous Oxide" DVDs, plus we have many other titles that may interest you (or someone else wanting to learn about this stuff). They make great Christmas, Birthday and Father's Day gifts! You can check them out by clicking HERE.
Show your love and support by sportin' a cool Bad Ass Cars T shirt! Click HERE
Here are some other items you may be interested in: